Beyond FTAs: Malaysia's Duty Exemption, Drawback and Deferment Routes
Most brands entering Malaysia look at duty exactly once: they check whether an FTA gives them a zero rate, and if it does not, they add the full tariff to the landed cost and move on.
That skips four or five other routes in the Customs Act 1967 — exemptions, remission, drawback on re-export, temporary-import relief, and deferment. None of them is exotic. All of them share one requirement that disqualifies most people who find out too late: the paperwork has to be done before the goods move.
This is a pre-screening overview, not tax advice. Exemption orders and MIDA guidelines are amended frequently — verify the current instrument and guideline before you rely on either.
Route 1: ministerial exemption
Section 14(1) of the Customs Act 1967 [Act 235] is the source of most published exemptions:
The Minister may, by order, exempt, subject to such conditions as he may deem fit to impose, any class of goods or persons from the payment of the whole or any part of any customs duty or any other prescribed fee or charge which may be payable.
That power produces the gazetted exemption orders — principally the Customs Duties (Exemption) Order 2017 [P.U.(A) 445/2017], which is itself amended regularly. Exemptions sit in its Schedule, by item number, and each item carries its own class of person, class of goods and conditions.
Section 14(2) then covers the one-off case: the Minister may, in any particular case, exempt a specific person from the whole or part of the duty, or direct a refund of duty already paid — again, subject to conditions.
And section 14A lets the Minister remit duty, surcharge, penalty, fee or other money payable under the Act "if he thinks it just and equitable to do so", with a refund where the remitted amount has already been paid.
The two conditions traps
This is where exemptions turn into liabilities.
Section 14(3): goods exempted under section 14 are deemed to be dutiable goods until the conditions, if any, subject to which the exemption was granted are fulfilled — and remain liable to all other charges that are not customs duties. An exemption is not a reclassification into "non-dutiable"; it is a conditional suspension.
Section 15 — reimposition. If exempted goods cease to comply with the conditions, or cease to be kept or used by the person or for the purposes that qualified them, the goods become liable to duty, and the person granted the exemption and any person found in possession of those goods are jointly and severally liable.
Read that twice if you ever buy second-hand industrial equipment in Malaysia. A machine imported duty-free under an exemption, then sold on, can carry a duty exposure that reaches the buyer. Due diligence on the import history of capital equipment is not paranoia.
Route 2: MIDA is the gateway for manufacturers
For manufacturing and agriculture inputs, the practical route runs through the Malaysian Investment Development Authority (MIDA) before it reaches Customs. MIDA publishes separate guidelines per category, and two of them show the pattern clearly.
For raw materials and components, MIDA's guideline states that companies engaged in manufacturing activities can be considered for import duty exemption on raw materials and components used directly in producing finished products and imported directly. For machinery and equipment in the agriculture sector, the equivalent guideline covers machinery not produced locally and imported directly by a company in selected agriculture activities.
Two rules appear in both, and they are the ones that decide whether you qualify:
Only application with total duty and/or tax exemption value of RM5,000 and above (per submission) will be considered for exemption.
Application must be submitted prior to the importation or purchase of the raw materials and components.
Applications go online via investmalaysia.mida.gov.my. The supporting documents for the raw-materials route include a manufacturing licence issued under the Industrial Coordination Act 1975 (or MIDA's confirmation letter for a company exempted from one), any tax incentive approval under the Promotion of Investment Act 1986 or Income Tax Act 1967, a DOSH registration certificate or acknowledgement letter, an SSM company profile printout, a manufacturing process flow chart, and a layout plan showing where the machinery sits in the approved premises.
The headline there is not the document list. It is "prior to the importation or purchase". An exemption application filed after the container lands is an application for the wrong thing.
Route 3: drawback when the goods leave again
If duty has been paid and the goods are then re-exported, section 93 allows nine-tenths of the duty back as drawback — but only on six conditions, each of which disqualifies somebody:
- the goods are identified to the satisfaction of a senior officer of customs at the customs port or airport where they are shipped for re-export, or at the place of re-export;
- the drawback claimed on any one consignment is not less than two hundred ringgit;
- the goods are re-exported within three months of the date the duty was paid;
- drawback on that class of goods has not been prohibited by regulations;
- written notice is given at or before the time of re-export that a claim will be made, and the claim is made in the prescribed form and established to a senior officer's satisfaction within three months of re-export; and
- the goods have not been used after importation.
The amount is calculated at the rate of customs duty levied at the time of import (section 93(2)). Section 94 then requires a declaration that the goods have actually been re-exported and have not been relanded or detrained, and are not intended to be.
The condition that quietly kills most claims is the notice one. Drawback is not a refund you apply for afterwards from your records; you must flag the claim at or before the moment of export. If your shipping team does not know that, the entitlement evaporates at the gate.
Route 4: full drawback for manufacturers
Section 99 is more generous, and is the one that matters if you import inputs and export finished goods. Where imported goods are re-exported by the manufacturer as part or ingredient of goods manufactured in Malaysia — or as the packing, or part of the packing, of those goods — the Director General may allow the manufacturer a full drawback of the duty paid, if:
- the finished goods were manufactured on premises approved by the Director General;
- such books and accounts are kept as the Director General requires, to ascertain the quantity of goods used in the manufacture or packing;
- the goods are re-exported within twelve months of the date the import duty was paid, or a further period the Director General approves;
- written notice is given on the prescribed export declaration form that a claim will be made, and the claim is made in the prescribed form within six months of re-export, or a further approved period; and
- the finished goods are exported through places or routes approved by the Director General.
Section 99(1A) adds that the Director General may allow drawback on waste or refuse resulting from the manufacture, whether re-exported or not — provided the quantity of that waste is proven to his satisfaction. For a process with meaningful yield loss, that is real money, and it depends entirely on the quality of your production records.
Note the asymmetry worth planning around: plain re-export gets nine-tenths within three months; manufacturing re-export gets the full amount within twelve.
Route 5: samples and goods that are only visiting
Section 96 allows drawback of duty paid on personal effects and other goods imported by visitors for personal use, on samples imported by commercial travellers, and on trade samples and other prescribed goods, where they are re-exported within three months of importation or a further period the Director General allows.
Section 97 handles temporary imports properly. Where the Director General is satisfied that goods are imported only temporarily with a view to subsequent re-exportation, he may permit delivery on importation without payment of duty, against a deposit of not less than the duty that would otherwise be payable, or security to his satisfaction. The deposit is refunded or the security discharged if the goods are re-exported within three months of importation, or a further period he allows.
That is the provision for demo units, exhibition stock, testing equipment and production trials. It costs you working capital, not duty.
Section 98 covers the reverse trip: the Director General may, at his discretion and subject to such restrictions as he sees fit, allow goods that were declared as trade samples on export to be reimported free of duty.
Route 6: not "don't pay" but "don't pay yet"
Three provisions change when duty falls due rather than whether:
Licensed manufacturing warehouse — section 65A. The Director General may license a person to carry on a manufacturing process and other operations in respect of goods liable to customs duties. A licence under section 65A is deemed to include a licence for warehousing under section 65. No goods that have undergone a manufacturing process in the licensed manufacturing warehouse may be released for home consumption or export without the Director General's prior approval — and where they are released for home consumption, duty is calculated as if the goods had been imported. Export them instead and that point never arrives.
Deferred payment — section 88A. The Director General may approve a person to defer payment of customs duty due under sections 78A and 80, and determine the due date. The approval can be suspended, withdrawn or varied. And the sanction is not a late-payment fee: a person who fails to pay on the due date commits an offence and is liable on conviction to a fine not exceeding fifty thousand ringgit, or imprisonment up to three years, or both. Deferment is a cash-flow facility with criminal consequences for sloppy treasury.
Accredited person — section 88B. The Director General may approve a person as an accredited person to benefit from simplified customs clearance procedures as he determines, on terms he imposes, and may suspend or withdraw the approval. This is the route to faster release for importers with a clean compliance record, and it is earned over time rather than bought.
Which route fits which business
| Your situation | Look at |
|---|---|
| Importing finished goods for the Malaysian market | FTA preference; exemption order items; section 14(2) in a special case |
| Manufacturing in Malaysia from imported inputs | MIDA raw materials and components exemption; section 99 drawback; section 65A LMW |
| Capital equipment for a Malaysian plant | MIDA machinery and equipment exemption — filed before purchase or import |
| Demo units, exhibition or test stock | Section 97 temporary import against deposit or security |
| Samples carried in or sent in | Section 96; section 98 for reimported trade samples |
| Goods that turned out to be wrong and are going back | Section 93 drawback — notice at or before export |
| Healthy volumes, tight cash cycle | Section 88A deferment; section 88B accredited person |
The one discipline all of these share
Every route above is lost the same way: by acting after the fact. MIDA requires the application before importation or purchase. Section 93 requires notice at or before re-export. Section 97 requires the deposit arrangement at importation. Section 10A of the same Act gives you the right to a customs ruling before import and only a discretion afterwards.
Build the question "is there a relief for this, and what must we file first?" into the step where you pick the tariff code — not into the step where you review the duty you have already paid.
Frequently Asked Questions (FAQ)
Q: Is there any duty relief in Malaysia if my country has no FTA? Yes. FTA preference is only one route. Section 14 exemptions, section 14A remission, drawback under sections 93 and 99, section 96 and 97 sample and temporary-import relief, and the deferment provisions in sections 88A and 88B are all independent of origin.
Q: Can I claim duty back after re-exporting goods I already cleared? Only if you gave written notice at or before the time of re-export that a claim would be made. Section 93 also requires re-export within three months of paying the duty, a claim of not less than RM200 per consignment, and that the goods have not been used after importation.
Q: How much drawback do I get? Nine-tenths of the duty under section 93 for straight re-export. Under section 99, a manufacturer re-exporting imported goods as part, ingredient or packing of goods manufactured in Malaysia may receive a full drawback, subject to approved premises, record-keeping, a twelve-month re-export window and a six-month claim window.
Q: What is the minimum value for a MIDA exemption application? MIDA's published guidelines state that only applications with a total duty and/or tax exemption value of RM5,000 and above per submission will be considered, and that the application must be submitted prior to the importation or purchase.
Q: If I buy duty-exempt equipment from another company, am I exposed? Potentially. Under section 15, where exempted goods cease to comply with the conditions or cease to be kept or used by the qualifying person or purpose, the person granted the exemption and any person found in possession of the goods are jointly and severally liable for the duty.
Q: Can I bring demo units in without paying duty? Section 97 allows the Director General to permit temporarily imported goods to be delivered without payment of duty against a deposit of not less than the duty, or security, refunded or discharged on re-export within three months of importation or a further period he allows.
Duty is not the only landed cost
A relief application saves duty. It does nothing for a container held because the label is missing a required particular — and that hold runs its own meter.
Check the artwork first: run your draft through our free label check before the print run.
Related reading: Certificate of origin and FTA preferences · Locking your HS code before you ship · How to calculate import sales tax (SST)
📚 Sources / official references
- Customs Act 1967 [Act 235], Laws of Malaysia — official consolidated text as at 30-12-2023, Attorney General's Chambers
- MIDA — Guideline and Procedure for Application for Import Duty and/or Sales Tax Exemption on Raw Materials and Components
- MIDA — Guideline and Procedure for Application for Import Duty and/or Sales Tax Exemption on Machinery and Equipment for Agriculture Sector
- Invest Malaysia portal (MIDA online applications)
- Royal Malaysian Customs Department (JKDM)
This article is compiled from the official sources above for reference only; actual compliance is subject to the authorities' latest regulations and review.
Find out what your label is missing
Free label check →