PinLabelPinLabel
Home / Knowledge Base / General Goods / Batteries and E-Waste in Malaysia: There Is No Recycling Mark to Print

Batteries and E-Waste in Malaysia: There Is No Recycling Mark to Print

General Goods · 2026-11-07 · PinLabel Compliance Team
Batteries and E-Waste in Malaysia: There Is No Recycling Mark to Print
🔀Import vs local: the rules differ — This is where importing and operating locally diverge sharply. A brand that only SHIPS product to a Malaysian distributor generates no scheduled waste and has no duty under these Regulations — and nothing to print, since Regulation 10's label is for waste storage containers, not consumer packaging. A brand that OPERATES in Malaysia — a subsidiary, a warehouse handling returns, a service centre, or a consumer take-back scheme — becomes a "waste generator" as soon as the first dead battery or failed board is set aside, and picks up the 30-day notification, container labelling, 180-day and 20-tonne storage limits, three-year inventory, six-copy consignment note and staff training duties. Imported chemical drums emptied locally are also scheduled waste, under SW 410.

A client asked us which recycling symbol Malaysia requires on a battery-powered product. They had the crossed-out wheelie bin on their European artwork and assumed there was a local equivalent to find.

The honest answer is that Malaysia's battery and electronic-waste rules are not a labelling regime at all. They are a waste-handling regime, and the labelling duty inside them attaches to the drum in your warehouse — not to the box on the shelf.

That is a more useful answer than a symbol, because the duties it does create are substantial, they have deadlines, and they land on whoever generates the waste in Malaysia. Which, if you run a subsidiary, a service centre, a returns operation or a take-back scheme, is you.

This is a pre-screening overview, not a compliance opinion. Product-category rules sit outside these Regulations — verify your own category separately, and confirm the current text with the Department of Environment.

The instrument

The rules are the Environmental Quality (Scheduled Wastes) Regulations 2005 [P.U.(A) 294/2005], made under sections 21 and 51 of the Environmental Quality Act 1974 [Act 127] after consultation with the Environmental Quality Council, in operation from 15 August 2005. They revoked the 1989 Regulations.

"Scheduled wastes" means any waste falling within the categories listed in the First Schedule. "Waste generator" means, simply, any person who generates scheduled wastes. There is no size threshold in that definition.

Your four codes

If you sell batteries, battery-powered products, or electronics into Malaysia, these are the First Schedule entries that will eventually describe something in your possession:

Code Category
SW 102 Waste of lead acid batteries in whole or crushed form
SW 103 Waste of batteries containing cadmium and nickel or mercury or lithium
SW 110 Waste from electrical and electronic assemblies containing components such as accumulators, mercury switches, glass from cathode-ray tubes and other activated glass or polychlorinated biphenyl capacitors, or contaminated with cadmium, mercury, lead, nickel, chromium, copper, lithium, silver, manganese or polychlorinated biphenyl
SW 410 Disposed containers, bags or equipment contaminated with chemicals, pesticides, mineral oil or scheduled wastes

SW 103 is the one most product companies underestimate. It is not limited to industrial cells. Lithium is named — which reaches consumer rechargeable packs, coin cells and the spares in your service inventory.

SW 410 is the quiet one. The empty drum your imported concentrate came in is itself scheduled waste.

The labelling duty is real — and it is on the container

Regulation 10 is headed "Labelling of scheduled wastes", and it is specific:

(1) The date when the scheduled wastes are first generated, name, address and telephone number of the waste generator shall be clearly labelled on the containers that are used to store the scheduled wastes.

(2) Containers of scheduled wastes shall be clearly labelled in accordance with the types applicable to them as specified in the Third Schedule and marked with the scheduled waste code as specified in the First Schedule for identification and warning purposes.

(3) No person is allowed to alter the markings and labels mentioned in subregulations (1) and (2).

So there is a prescribed label — four pieces of identification, a Third Schedule hazard type, and the SW code — and it goes on the storage container, with the generation date on it.

Separately, regulation 8(2) requires every waste generator to ensure scheduled wastes subject to movement or transfer are packaged, labelled and transported in accordance with the guidelines prescribed by the Director General.

Two label systems that look nothing alike

Worth noticing if you handle both chemicals and their waste: the Third Schedule's visual system is a UN transport-style diamond set with its own colour rules — black exploding bomb on light orange for explosive substances, black or white flame on red for inflammable liquids, black flame on white with vertical red stripes for inflammable solids, black flame-over-circle on yellow for oxidizing substances and organic peroxides, black skull-and-crossbones on white for toxic substances, upper-half-white and lower-half-black for corrosive substances.

That is not the GHS set used on product labels, which under Malaysia's CLASS Regulations must be a black symbol on a white background with a red border.

And the two regimes are mutually exclusive by design: subregulation 2(2) of the CLASS Regulations expressly exempts scheduled waste under the First Schedule of these Regulations from CLASS. A material is governed by one system or the other depending on whether it is a product being supplied or a waste being held — never both at once.

What actually follows from being a waste generator

If your Malaysian operation accumulates dead batteries, failed boards, or contaminated packaging, this is the full set of duties — and the labelling is the smallest of them.

Notify within 30 days. Regulation 3: every waste generator shall, within 30 days from the date of generation, notify the Director General of the new categories and quantities of scheduled wastes generated, with the information in the Second Schedule.

Dispose only at prescribed premises. Regulation 4: scheduled wastes shall be disposed of at prescribed premises only, and shall as far as practicable be rendered innocuous before disposal. Treatment and material recovery are likewise confined to prescribed premises or approved on-site facilities (regulations 5 and 6).

Store in compatible, closed containers. Regulation 9 requires containers compatible with the waste, durable, and able to prevent spillage or leakage; incompatible wastes in separate containers in separate secondary containment areas; containers always closed except when adding or removing waste; storage areas designed and maintained per the Director General's guidelines.

180 days and 20 tonnes. Subregulation 9(5) permits storage for 180 days or less after generation, provided the quantity accumulated on site does not exceed 20 metric tonnes — and the Director General may at any time direct the generator to send waste for treatment, disposal or recovery. Exceeding 20 tonnes requires a written application and the Director General's written approval.

Keep an inventory for three years. Regulation 11: an accurate and up-to-date inventory per the Fifth Schedule of categories and quantities generated, treated, disposed of, and recovered — retained for up to three years from the date of generation.

Run the consignment-note chain properly. Regulation 12 sets out a six-copy Sixth Schedule process with real deadlines. You complete Part I in six copies and hand them to the licensed contractor on collection. The contractor completes Part II, returns two copies to you, and you submit one to the Director General within 30 days of transportation. The contractor delivers the waste to a prescribed premises within 10 days of receipt. The occupier completes Part III and returns copies to the contractor, you and the Director General within 20 days of receipt. And the duty that gets missed: if your copy does not come back within 30 days of handing the waste to the contractor, you must notify the Director General immediately, investigate, and report the result of your investigation. All three parties keep a signed copy for at least three years.

Send information with the load. Regulation 13 requires the Seventh Schedule information for each category of waste to be given to the contractor on delivery, and the generator must inform the contractor of its purpose and use.

Train your people. Regulation 15: every waste generator shall ensure all employees involved in the identification, handling, labelling, transportation, storage and spillage or discharge response of scheduled wastes attend training programmes.

Spills. Regulation 14 puts immediate notification of the Director General on the contractor responsible for the waste — but the waste generator shall provide technical expertise and supporting assistance in the clean-up.

Special management. Regulation 7 allows a generator to apply in writing to have waste from a particular facility or process excluded from the prescribed-premises route, accompanied by a non-refundable fee of three hundred ringgit.

Enforcement. Regulation 16: offences consisting of any omission or neglect to comply, or any act contrary to the Regulations, may be compounded under section 45 of the Environmental Quality Act 1974, under the procedure in the Environmental Quality (Compounding of Offences) Rules 1978.

So what goes on the product?

Nothing, under these Regulations. They do not prescribe a mark for consumer packaging, and the Third Schedule label is for waste containers.

That leaves three practical conclusions.

A carried-over recycling symbol is not compliance. If your artwork already shows a crossed-out wheelie bin or a chasing-arrows mark from another market, it is not prohibited by these Regulations — but it buys you nothing in Malaysia, and it must not crowd out or contradict a marking your product category actually requires. Space on a label is finite, and the mandatory particulars win.

Your product-category rules are a separate question. Battery and electronic products carry requirements from other instruments and authorities depending on what they are — safety certification, standards marks, and category-specific warnings. Those are where your printed obligations come from, not from the waste Regulations.

If you operate in Malaysia, the back-end duties are yours. A brand that ships and walks away has no waste-generator exposure. A brand with a subsidiary, a warehouse handling returns, a repair centre, or a consumer take-back programme becomes a waste generator the day the first dead battery lands in a bin — with the 30-day notification, the 180-day and 20-tonne storage limits, the container labelling, the inventory and the consignment-note chain all live from that point.

Frequently Asked Questions (FAQ)

Q: Does Malaysia require a battery recycling symbol on product packaging? The Environmental Quality (Scheduled Wastes) Regulations 2005 do not prescribe a consumer-product mark. Their labelling duty, in regulation 10, applies to the containers used to store scheduled wastes. Printed requirements for your product come from your product-category rules instead.

Q: Which scheduled waste codes cover batteries and electronics? SW 102 for waste lead acid batteries whole or crushed, SW 103 for waste batteries containing cadmium and nickel or mercury or lithium, and SW 110 for waste from electrical and electronic assemblies containing listed components or contaminated with listed metals or PCB.

Q: What must a scheduled waste container label show? The date the waste was first generated, plus the name, address and telephone number of the waste generator, clearly labelled; the applicable Third Schedule label type; and the scheduled waste code from the First Schedule. No person may alter those markings.

Q: How long can we hold waste batteries on site? Subregulation 9(5) allows 180 days or less after generation, provided the quantity accumulated on site does not exceed 20 metric tonnes. More than that requires a written application and the Director General's written approval.

Q: Do we have to tell the authorities before we generate waste? Regulation 3 requires notification to the Director General within 30 days from the date of generation of new categories and quantities of scheduled wastes, with the information set out in the Second Schedule.

Q: Do the CLASS chemical labelling rules apply to our waste? No. Subregulation 2(2) of the CLASS Regulations exempts scheduled waste under the First Schedule of the Scheduled Wastes Regulations. Products supplied for use at a place of work follow CLASS; waste follows these Regulations.

What actually has to be printed

The waste rules will not tell you what goes on your box. Your product category will — and it is usually more than brands expect: identification, country of origin, importer details, and category-specific warnings, in the right language and at the right size.

Run your draft artwork through our free label check before the print run.

Related reading: Button battery toy safety · Malaysia's CLASS Regulations: classification, labelling and SDS · Why your supplier's SDS will not pass

Find out what your label is missing

Free label check →