Why Your Supplier's Safety Data Sheet Will Not Pass in Malaysia
Your supplier sent you a safety data sheet. It is sixteen sections, it looks professional, it was good enough for Europe. Your Malaysian distributor's safety officer takes one look and rejects it.
Two reasons, usually. It is in English only. And the hazard statements use wording that is not the wording Malaysia specifies.
Neither is a formatting quibble. Furnishing a non-compliant SDS is a listed offence under Malaysia's CLASS Regulations, and the duty sits on the importer — not on the overseas manufacturer who wrote the document.
This is a pre-screening overview, not a compliance opinion. Verify against the current Regulations and the ICOP CHC before you rely on an SDS.
The instrument, and the two words that decide whether it applies to you
The rules are the Occupational Safety and Health (Classification, Labelling and Safety Data Sheet of Hazardous Chemicals) Regulations 2013 [P.U.(A) 310/2013] — "the CLASS Regulations" — gazetted on 11 October 2013 and taking effect the following day, made under paragraphs 66(2)(a), (c), (k) and (u) of the Occupational Safety and Health Act 1994 [Act 514]. They replaced the older CPL Regulations 1997, and they implement the UN Globally Harmonised System, classification being based on the GHS 3rd Revised Edition (2009).
The scope-defining phrase is in subregulation 2(1): the Regulations apply to chemicals — substances or mixtures — supplied for use at a place of work.
That single phrase decides the agency you answer to, and the Department of Occupational Safety and Health says so directly in its published CLASS FAQ:
DOSH is responsible to enforce CLASS Regulations involving chemicals supplied for use at place of work only. Consumer sector is under the responsibility of Ministry of Domestic Trade and Consumer Affairs. However, if the consumer product is a chemical supplied for use at workplaces, it shall comply with CLASS Regulations.
So a household cleaner sold through supermarkets is a consumer-affairs matter. The same cleaner sold in bulk to a contract cleaning company is a CLASS matter. Brands that do both are in both regimes, with one artwork and one SDS trying to serve two masters. DOSH's FAQ also confirms that retailers supplying hazardous chemicals to workplaces must comply with the packaging, labelling and SDS requirements.
What falls outside
Subregulation 2(2) exempts radioactive material under the Atomic Energy Licensing Act 1984; scheduled waste under the First Schedule of the Environmental Quality (Scheduled Wastes) Regulations 2005; cosmetics and products under the Control of Drugs and Cosmetics Regulations 1984; chemicals used for research, development or trial purposes that are not for sale, do not exceed 5 kg, and for which adequate safe-use information is made available; and manufactured articles whose function depends on their shape or design and which do not release significant quantities of chemicals in normal use.
Subregulation 2(3) is a partial carve-out worth knowing: for pesticides under the Pesticides Act 1974, and for chemicals in transit prior to export held in a storage area, the classification, packaging, labelling and inventory Parts do not apply — but the SDS and confidential-business-information Parts still do. Transit does not switch the SDS duty off.
Whose job is it
The Regulations split suppliers in two.
A principal supplier is a manufacturer, formulator, importer, recycler or reformulator. Principal suppliers carry the classification, packaging, labelling and SDS duties; manufacturers and importers additionally carry the inventory duty.
A subsidiary supplier is a repacker, distributor or retailer, and carries the packaging, labelling and SDS duties.
DOSH's FAQ removes any ambiguity about imports:
For imported products, the responsibility lies with the importer. The importer is to provide the packaging, SDS and label complying with CLASS Regulations when the product enters the place of work.
And on the language question specifically — asked whether the importer must translate where the overseas supplier cannot provide a Malay version:
Yes. It is the duty as importer (principal supplier) to prepare a CLASS Regulations' compliant SDS in both languages.
There is no version of this where the overseas factory's document discharges the Malaysian importer's obligation.
When an SDS is required — including when the product is "not hazardous"
Subregulation 13(1) requires the supplier to furnish an updated SDS to the recipient for each hazardous chemical supplied, and for any mixture containing hazardous substances at a concentration exceeding the cut-off value in the Fifth Schedule.
That second limb catches people who have concluded their product is fine. DOSH's FAQ spells it out: where a chemical has been classified and found not classified, the packaging, labelling, SDS and inventory requirements do not apply to it — "However, the requirement of SDS is still applicable to the chemical mixture containing hazardous substance exceeding concentration specified in the Fifth Schedule of the CLASS Regulations."
The Fifth Schedule cut-offs:
| Hazard class | Cut-off value |
|---|---|
| Acute toxicity | 1.0% or more |
| Skin corrosion or irritation | 1.0% or more |
| Serious eye damage or eye irritation | 1.0% or more |
| Respiratory sensitisation | 0.1% or more |
| Skin sensitisation | 0.1% or more |
| Germ cell mutagenicity (Category 1) | 0.1% or more |
| Germ cell mutagenicity (Category 2) | 1.0% or more |
| Carcinogenic | 0.1% or more |
| Reproductive toxicity | 0.1% or more |
| Specific target organ toxicity — single exposure | 1.0% or more |
| Specific target organ toxicity — repeated exposure | 1.0% or more |
| Aspiration hazard | 10.0% or more |
| Hazardous to the aquatic environment | 1.0% or more |
A mixture that classifies as "not classified" can still contain a sensitiser at 0.15% — and then you owe an SDS on a product that needs no hazard label.
The sixteen headings, in this order
Subregulation 13(2) fixes the headings and their order:
- Identification of the hazardous chemical and supplier
- Hazard identification
- Composition and information of the ingredients of hazardous chemical
- First aid measures
- Fire fighting measures
- Accidental release measures
- Handling and storage
- Exposure controls and personal protection
- Physical and chemical properties
- Stability and reactivity
- Toxicological information
- Ecological information
- Disposal information
- Transportation information
- Regulatory information
- Other information
Subregulation 13(3) then requires the information to meet the minimum requirement specified in Part 3 of the Industry Code of Practice on Chemicals Classification and Hazard Communication (ICOP CHC), and to be written in both the national language and English. The ICOP CHC 2014 was itself gazetted as P.U.(B) 128 on 16 April 2014, promulgated under section 37 of OSHA 1994 as guidance for complying with the Regulations.
The structural good news for anyone holding a European dossier: DOSH's FAQ confirms that REACH data can be used where it relates to the information the SDS requires. The sixteen-section skeleton is the same. It is the language and the prescribed phrasing that have to change.
Translation: no certified translator, but no free hand either
DOSH's answer on this is more permissive than most importers expect, and stricter in the place that matters:
CLASS Regulations does not require translations to be made by certified translators as long as the meaning does not deviate from the original documents. It is the duty of the suppliers to ensure appropriate translation of SDS from English to Malay Language. DOSH is not providing any translation services. However, common terms and phrases such as hazard classification, hazard statement, precautionary statements and SDS headings shall be as specified in both languages in the Regulations and Industry Code of Practice on Chemicals Classification and Hazard Communication (ICOP CHC).
So you can have your own technical team translate the narrative. You cannot paraphrase the standard phrases. Hazard statements, precautionary statements, hazard-class names and the sixteen headings must use the wording given in the Regulations and the ICOP CHC, in both languages — which means the translation job is really two jobs: look up the fixed phrases, then translate the rest.
There is no approval to collect
Importers coming from pharmaceutical or cosmetic regimes keep asking where to submit. The answer is nowhere:
No, DOSH does not provide any approval or certification to SDS and labelling. It is the duty of supplier to ensure their SDS and labelling is according to the CLASS Regulations and ICOP CHC.
No reference number, no stamp, no comfort letter. The first time anyone official reads your SDS may be during an inspection.
The document you probably do not have
Separate from the SDS, regulation 5 requires the principal supplier to keep a record of classification, in the format given at paragraph 2.7 of Part 2 of the ICOP CHC, and to make it available for inspection.
DOSH is blunt about the relationship between the two documents: "Please be informed that an SDS is not a classification record."
The record exists to show why the chemical is classified as it is — with justifications, data, proper citations and traceability. Where the chemical is listed in Part 1 of the ICOP CHC, it is enough to say so in the justification column. Where it is not listed, the principal supplier must self-classify using the methodology in Part 2.
For imports, DOSH's FAQ sets the expectation clearly: the importer obtains classification data from the overseas manufacturer, and if it cannot be obtained, must search literature, journals, established articles or internationally recognised chemical databases and self-classify — and "it is the duty of the importer to make classification record available for inspection."
And note the sting in the tail: even where a chemical turns out not to be hazardous, "classification and the record of classification shall be prepared and kept by the importer." Concluding you are out of scope is itself a documented act.
Confidential business information has a narrow door
Regulation 15 limits what can be withheld to two things: the name of a hazardous chemical, and its composition and ingredients. A withheld name is replaced by a generic name; a withheld composition by a concentration range — and both must be taken from Part 4 of the ICOP CHC rather than invented.
One limit catches formulators out. Asked whether CBI can be claimed for a substance, DOSH's answer is one word: No. The protection is for mixtures.
A review cycle you should diarise
Subregulation 13(4) requires the SDS to be revised when there is new information on the chemical, when more than five years have elapsed since the last date of preparation or revision, or when directed by an officer — and the revised SDS must be furnished as soon as practicable.
Five years passes quietly. An SDS dated 2019 sitting in a 2026 product file is a finding waiting to happen, with no change in the product required to make it one.
A working sequence
- Decide the scope question honestly: is this supplied for use at a place of work? If you sell both ways, assume CLASS applies to the workplace channel.
- Get classification data from the overseas manufacturer in writing. If it will not come, plan to self-classify under Part 2 of the ICOP CHC.
- Build the classification record first. The SDS is downstream of it, and does not substitute for it.
- Check the Fifth Schedule cut-offs even if the mixture is "not classified" — you may still owe an SDS.
- Produce the SDS to the sixteen headings in order, to Part 3 of the ICOP CHC, in Malay and English, using the prescribed phrases verbatim in both languages.
- Put the local supplier's identification on it. That is not optional.
- Diarise the five-year revision, and tie SDS re-issue to your product-change process.
Frequently Asked Questions (FAQ)
Q: Does Malaysia require the SDS in Malay? Yes. Subregulation 13(3) requires the SDS information to be in both the national language and English, and DOSH states that preparing a compliant SDS in both languages is the importer's duty as principal supplier.
Q: Can I just use my European REACH SDS? The data can be reused where it relates to the information required, and the sixteen-section structure matches. What must change is the language and the prescribed wording — hazard statements, precautionary statements, hazard classifications and the headings must follow the Regulations and the ICOP CHC.
Q: Do I need a certified translator? No. DOSH states the Regulations do not require translation by certified translators provided the meaning does not deviate — but common terms and phrases must be as specified in both languages in the Regulations and the ICOP CHC.
Q: My product is not classified as hazardous. Am I finished? Not necessarily. An SDS is still required for a mixture containing a hazardous substance above the Fifth Schedule cut-off, and the classification and its record must still be prepared and kept.
Q: Where do I submit the SDS for approval? Nowhere. DOSH does not provide approval or certification for SDS or labelling; ensuring compliance is the supplier's own duty.
Q: How often must the SDS be updated? When there is new information on the chemical, when more than five years have elapsed since the last preparation or revision, or when an officer directs it — and the revised SDS must be furnished as soon as practicable.
The label is the other half
An SDS that passes does not make the drum legal. The label carries its own six mandatory elements, its own bilingual rule, and a pictogram specification that most imported artwork fails on first inspection.
Check the artwork before the print run with our free label check.
Related reading: Malaysia's CLASS Regulations: classification, labelling and SDS · The one-tonne CLASS inventory duty · Aerosols under CLASS
📚 Sources / official references
- Occupational Safety and Health Act 1994 [Act 514], Laws of Malaysia — Attorney General's Chambers (the CLASS Regulations 2013 [P.U.(A) 310/2013] are made under paragraph 66(2))
- Subsidiary legislation index — P.U.(A) 310/2013, Occupational Safety and Health (Classification, Labelling and Safety Data Sheet of Hazardous Chemicals) Regulations 2013, gazetted 11 October 2013
- Frequently Asked Questions for CLASS Regulations (FAQ CLASS) — Department of Occupational Safety and Health, Malaysia
- Department of Occupational Safety and Health (DOSH / JKKP), Malaysia
This article is compiled from the official sources above for reference only; actual compliance is subject to the authorities' latest regulations and review.
Find out what your label is missing
Free label check →