PinLabelPinLabel
Home / Knowledge Base / Electrical & Appliances / Trade Show Samples in Malaysia: Exhibition CoA or Release Letter?

Trade Show Samples in Malaysia: Exhibition CoA or Release Letter?

Electrical & Appliances · 2026-11-07 · PinLabel Compliance Team
Trade Show Samples in Malaysia: Exhibition CoA or Release Letter?
🔀Import vs local: the rules differ — Exhibition and sample routes are import-side. Exhibitors who display regulated equipment must apply for a CoA; the exhibition variant allows display only — not sold, installed or used — and the units must be re-exported or returned to the country of origin afterwards. Evaluation samples left behind fall under the Quality Research release letter, capped at 4 units per model and not to be sold, advertised or exhibited.

You are shipping three units of a new appliance to a trade show in Kuala Lumpur. They are display samples. Nothing will be sold. Do you need a Certificate of Approval?

Yes — and it is a specific kind of CoA, not the one you would get for retail stock. Malaysia has two separate instruments for bringing electrical goods in without selling them, and importers routinely apply for the wrong one.

This is a pre-screening overview, not a compliance guarantee. Verify against the current guideline before you book freight.

Exhibitors are named explicitly

The Guideline for Approval of Electrical Equipment, GP/ST/No.14/2017, Sixth Edition (2018) lists exhibitors among the four parties who must apply, in Chapter 4:

Exhibitors who display electrical equipment under sub regulation 97(1) of the Electricity Regulations 1994 are also required to apply for the CoA.

"We're only displaying it" is not an exemption. Display is one of the regulated activities — the Certificate of Approval covers permission to import, manufacture, display, sell or advertise regulated electrical equipment.

The exhibition CoA and what it restricts

The guideline provides a dedicated route — Application for CoA for Exhibition Purposes — with conditions that define exactly how limited it is:

Equipment approved is intended to be displayed only. It shall be: - NOT to be sold, installed or used; - re-exported or returned to country of origin after exhibition.

Read those three restrictions carefully, because each one catches somebody.

Not sold. The obvious one. No taking orders and handing over the unit at the booth.

Not installed. This is the one that surprises people. A demonstration unit plumbed in, wired into a booth's supply, or built into a working display may cross from "displayed" into "installed". If your stand concept involves a live working installation, raise it with the Commission rather than assuming.

Not used. A product running a demonstration cycle is a judgement call that you do not want to make unilaterally at the show.

Re-exported or returned. The units leave. You cannot donate them to the local distributor, run them as office demo stock, or sell them off at the end of the show to save freight. That last one is the most common temptation and the clearest breach.

Exhibition CoA versus Release Letter

Both routes exist. They are not interchangeable, and the distinction is where most of the confusion sits.

CoA for Exhibition Purposes Release Letter (RL)
What it is A Certificate of Approval, in an exhibition variant A letter to Customs granting exemption from the CoA
When it applies Displaying regulated equipment at an exhibition Eight listed purposes: Special Purpose, Concert, Factory Research, Quality Research, Re-Work and Re-Export, components for 100% export, components for local market, Transit
Fee CoA fees apply No fee imposed
Applied through e-Permit e-Permit (epermit.dagangnet.com)
Afterwards Re-export or return to country of origin Varies by purpose — re-export, disposal, or re-export after repair

The Release Letter's Concert category is the one most often mistaken for an exhibition route. It covers performance equipment on tour: the guideline says that equipment shall not be sold, advertised and exhibited, and must be re-exported after the concert. Note that "exhibited" is explicitly excluded — a Concert release letter does not authorise a trade show stand.

If you are standing in a hall with a booth and visitors, you are exhibiting. That is the exhibition CoA.

What the Release Letter route is genuinely useful for

Around a trade show, two Release Letter categories often do apply to the goods that are not on the stand:

Quality Research — evaluation units for a prospective distributor to assess. A maximum of 4 units per model for quality or market research. The samples shall not be sold, advertised or exhibited, and must be disposed of after the research ends.

Factory Research — engineering samples, maximum 10 units per model, with a copy of the manufacturing licence.

So a realistic show might involve an exhibition CoA for the booth units, and a separate Quality Research release for the samples you leave with a potential partner — subject to the 4-unit cap and the no-sale condition.

The paperwork that gets it rejected

For any e-Permit application the guideline is explicit:

Information such as Name of Electrical Equipment, Brand and Model shall be correct or else application will be rejected.

Trade show freight is notoriously badly documented — the invoice says "exhibition samples", the AWB says the forwarder's description, and the catalogue says the marketing name. Reconcile all three to the actual model designation before submitting.

For Release Letters, the standard supporting documents are the invoice plus the Air Waybill (AWB) for air freight or the Bill of Lading (BL) for sea freight, with a catalogue for several categories.

Timing is the real constraint

Trade shows have fixed dates. An application rejected for a mismatched model number costs you a resubmission cycle you may not have.

Work backwards from the move-in date, not the show date, and treat the approval as a long-lead item alongside booth construction. If the units are also going to be left behind with a distributor afterwards, decide that before you apply — because "re-exported or returned to country of origin after exhibition" is a condition of the approval you are asking for, not a default you can vary later.

A checklist before you ship a booth

  1. Confirm the equipment is on the regulated list at all. If not, consider a Release Letter for non-regulated equipment for customs clearance.
  2. Booth units → CoA for Exhibition Purposes.
  3. Leave-behind evaluation samples → Quality Research release letter, maximum 4 units per model.
  4. Reconcile equipment name, brand and model across invoice, AWB/BL and catalogue.
  5. Plan the return freight. The units must leave.
  6. If your stand involves a live working installation, raise it with the Commission before you build it.
  7. Diary the re-export so it does not become an open compliance item.

Frequently Asked Questions (FAQ)

Q: We're only displaying, not selling. Do we really need a CoA? Yes. The guideline names exhibitors among the parties required to apply for the CoA, because display is one of the regulated activities alongside import, manufacture, sale and advertising.

Q: Can we sell the display units at the end of the show? No. Equipment approved for exhibition shall not be sold, installed or used, and must be re-exported or returned to the country of origin after the exhibition.

Q: Can we use a Release Letter instead of an exhibition CoA? Not for an exhibition stand. The Release Letter's Concert category explicitly excludes exhibited equipment. The eight Release Letter purposes do not include trade show display.

Q: How many evaluation samples can we leave with a prospective distributor? Under the Quality Research route, a maximum of 4 units per model for quality or market research — and those samples shall not be sold, advertised or exhibited, and must be disposed of after the research ends.

Q: Does a Release Letter cost anything? No. The guideline states there is no fee imposed for a Release Letter. The exhibition CoA, being a Certificate of Approval, carries CoA fees.

Q: Our booth plan has the product wired in and running. Is that still "display"? The conditions say not to be sold, installed or used. A live working installation sits close to that line, so raise the specific setup with the Commission rather than deciding on your own at move-in.

If the show goes well

The moment a distributor says yes, you are no longer in exhibition territory — you need a registered Malaysian importer, a full Certificate of Approval, SIRIM consignment testing, and a compliant label.

Start with the artwork: run your draft through our free label check before the print run.

Related reading: Who must hold the Malaysian CoA · Release Letters and customs exemptions · Overseas test reports: what ST accepts

📚 Sources / official references

  1. Guideline for Approval of Electrical Equipment, GP/ST/No.14/2017, Sixth Edition (2018) — Energy Commission (Suruhanjaya Tenaga)
  2. Suruhanjaya Tenaga (Energy Commission, Malaysia)
  3. ePermit — Dagang Net (Release Letter / CoA applications)

This article is compiled from the official sources above for reference only; actual compliance is subject to the authorities' latest regulations and review.

Find out what your label is missing

Free label check →