PinLabelPinLabel
Home / Knowledge Base / Electrical & Appliances / Release Letters: Clearing Electrical Goods Without a Malaysian CoA

Release Letters: Clearing Electrical Goods Without a Malaysian CoA

Electrical & Appliances · 2026-11-07 · PinLabel Compliance Team
Release Letters: Clearing Electrical Goods Without a Malaysian CoA
🔀Import vs local: the rules differ — The Release Letter is an import-side instrument: ST issues it to Customs as exemption from the CoA for imported regulated equipment. Locally manufactured equipment does not clear Customs and so does not use it — but a local manufacturer importing COMPONENTS does, under the 'components for local market' category, which requires a copy of the CoA to Manufacture plus test reports showing the components are needed for that equipment.

You have a container of regulated electrical equipment arriving in Port Klang, and no Certificate of Approval. Sometimes that is a disaster. Sometimes it is completely fine — because the goods are samples for testing, stage equipment for a concert, components you will re-export, or something that was never regulated in the first place.

The instrument that separates those cases is the Release Letter (RL), and it is the least-known document in Malaysia's electrical approval regime. It costs nothing, and most importers have never heard of it.

This is a pre-screening overview, not a compliance guarantee. Verify against the current guideline before you ship.

What a Release Letter actually is

The Energy Commission (Suruhanjaya Tenaga, ST) describes it plainly in the Guideline for Approval of Electrical Equipment, GP/ST/No.14/2017, Sixth Edition (2018):

The Energy Commission (ST) will issue a Release Letter to Customs as blanket approval for exemption from Certificate of Approval (CoA) for importation of ST's regulated electrical equipment.

So it is not a shortcut around certification for goods you intend to sell. It is an instruction to Customs that this particular consignment, for this particular purpose, does not need a CoA.

There is no fee imposed for a Release Letter. Applications go through e-Permit at epermit.dagangnet.com.

The eight purposes that qualify

The guideline lists the cases where a Release Letter applies:

Purpose Typical situation
Special Purpose Oil rig, tanker, SIRIM test, electric fence
Concert Touring stage and sound equipment
Factory Research Engineering samples for your own plant
Quality Research QC or market evaluation units
Re-Work and Re-Export Goods coming in for repair, then leaving
Components for 100% Export Parts built into products that all ship out
Components for Local Market Parts built into locally made equipment
Transit Goods passing through to another country

Separately, point 3 of the procedure covers the case many importers actually need: for non-regulated equipment, an applicant may request a Release Letter for Customs clearance purposes. If your product was never on the regulated list, the Release Letter is how you prove that to an officer who has stopped your shipment.

The unit limits nobody reads until it is too late

Two of the research categories carry hard caps:

  • Factory Research — a maximum of 10 units per model
  • Quality Research — a maximum of 4 units per model for quality or market research

Order 12 evaluation units and you have a problem at the border that no amount of explaining fixes. If your product team wants a larger pilot batch, that is not a research import; it needs a CoA.

Both research categories also carry a disposal condition: the imported sample shall not be sold, advertised or exhibited, and the sample must be disposed of after the end of the research. You cannot quietly roll evaluation units into your first retail shipment.

What each purpose requires

Nearly every category needs the same commercial spine: the invoice, plus the Air Waybill (AWB) for air freight or the Bill of Lading (BL) for sea freight. On top of that:

Special Purpose — a cover letter specifying the purpose of import, the name and address of the user, and the place of use. All applications are subject to the Commission's approval.

Concert — the equipment shall not be sold, advertised or exhibited, and must be re-exported after the concert. An equipment catalogue should also be available.

Factory Research — the 10-unit cap, plus a copy of the manufacturing licence.

Quality Research — the 4-unit cap.

Repair and Re-Export — the sample must be re-exported after repair; you need the export invoice as proof the equipment has left, plus a manufacturing licence.

Components for 100% Export — a letter confirming the completed equipment will be fully exported, plus a copy of the Licensed Manufacturing Warehouse (LMW) licence with appendices, or a tax exemption letter from the Ministry of Finance / MIDA, or from the Royal Malaysian Customs Department.

Components for Local Market — a copy of the CoA to Manufacture for the equipment that uses the imported components, and test reports showing the components are required for that equipment.

Transit — a cover letter naming the Bonded Customs Warehouse where the goods will sit, including the contact officer's name and telephone number, and confirming the equipment will be 100% re-exported, naming the destination country.

Non-regulated equipment — an equipment catalogue, a test report, and/or a sample if required.

The detail that gets applications rejected

The guideline is blunt about it:

Information such as Name of Electrical Equipment, Brand and Model shall be correct or else application will be rejected.

This sounds trivial until you realise how often a model number on an invoice differs by one character from the model on the catalogue, or the brand on the AWB is the trading company rather than the manufacturer. Reconcile the three documents before you submit, not after the rejection.

Where people get this wrong

Treating it as a CoA workaround. Every purpose above is temporary, non-commercial, or transitory. Goods for sale need a CoA. There is no category for "we'll certify later."

Assuming non-regulated means no paperwork. If Customs believes your product is regulated, your belief that it isn't does not clear the container. The non-regulated Release Letter exists precisely for that argument — get it before the shipment, not during a demurrage clock.

Forgetting the exit obligation. Concert, repair and transit goods must leave. Research samples must be disposed of. These are conditions on the release, not suggestions.

Confusing it with the exhibition route. Displaying equipment at a trade show is handled differently — exhibitors apply for a CoA for Exhibition Purposes, not a Release Letter. The Release Letter's "Concert" category is for performance equipment, not an exhibition stand.

A practical sequence

  1. Decide honestly which of the eight purposes you are in — or whether the product is non-regulated.
  2. Check the unit caps if it is factory (10) or quality/market (4) research.
  3. Assemble the invoice and AWB or BL.
  4. Add the category-specific document: cover letter, catalogue, manufacturing licence, LMW licence, CoA to Manufacture, or export invoice.
  5. Reconcile equipment name, brand and model across every document.
  6. Apply through e-Permit. No fee.
  7. Diary the exit or disposal obligation so it does not become a compliance problem a year later.

Frequently Asked Questions (FAQ)

Q: Does a Release Letter cost anything? No. The guideline states there is no fee imposed for a Release Letter. The cost is in preparing the documents and in the lead time.

Q: Can I import samples for sale later under a Release Letter? No. Factory Research and Quality Research samples shall not be sold, advertised or exhibited, and must be disposed of after the research ends. Goods intended for sale need a Certificate of Approval.

Q: How many units can I bring in for testing? A maximum of 10 units per model for factory research, and a maximum of 4 units per model for quality or market research.

Q: My product isn't on the regulated list. Do I still need anything? You may request a Release Letter for Customs clearance purposes for non-regulated equipment. You will typically need an equipment catalogue, a test report, and a sample if required. Getting this before shipping is far cheaper than arguing at the port.

Q: We're bringing equipment in for a concert tour. What applies? The Concert category. The equipment shall not be sold, advertised or exhibited, and must be re-exported after the concert. Bring the invoice, the AWB or BL, and an equipment catalogue.

Q: Is a Release Letter the same as a CoA for Exhibition? No. A CoA for Exhibition Purposes is a certificate for displaying equipment at an exhibition — display only, not sold, installed or used, and re-exported afterwards. A Release Letter is a customs exemption instruction for the eight purposes listed above.

Before the shipment that does need a CoA

Release Letters handle the exceptions. Your actual retail stock needs a Certificate of Approval, a compliant label, and a plug that meets Malaysian requirements.

Run the artwork through our free label check before the print run — it takes a couple of minutes and catches the particulars that most often come back from the market.

Related reading: Overseas test reports: what ST accepts · Malaysia's regulated electrical equipment list · Customs clearance in Malaysia

📚 Sources / official references

  1. Guideline for Approval of Electrical Equipment, GP/ST/No.14/2017, Sixth Edition (2018) — Energy Commission (Suruhanjaya Tenaga)
  2. Suruhanjaya Tenaga (Energy Commission, Malaysia)
  3. ePermit — Dagang Net (Release Letter / CoA applications)

This article is compiled from the official sources above for reference only; actual compliance is subject to the authorities' latest regulations and review.

Find out what your label is missing

Free label check →